The System Sensor RTS151 is an automatic fire detector accessory designed to test a remotely located detector. Consult detector installation instructions for additional information. Furthermore, the System Sensor RTS151 mounts to a single gang box (2 1/2” minimum depth), or directly to the wall or ceiling. With the magnet in place, some time will elapse (40 sec. maximum) depending on the detector type, before the alarm indicating LED will light. Also, gently insert a 1/8˝ maximum diameter tool into the hole until it stops and the LED turns off. Besides, the RTS151 is capable of resetting only certain System Sensor models of detectors. Refer to detector installation instructions for additional information.
In general, the National Fire Protection Association has published codes, standards, and recommended practices for the installation and use of the above product. It is recommended that the installer be familiar with these requirements, with local codes, as well as any special requirements of the local authority having jurisdiction.
Features / Specifications
- Dimensions: 4.8˝ H × 2.90˝ W × 1.4˝ D
- Weight: .16 lbs.
- Alarm LED: 2.8 – 32 VDC, 10 mA max.
- Coil Current: 95 mA max
- Test Switch: 10 VA @ 32 VDC
- Reset Switch: 10 VA @ 32 VDC
- Alarm Response Time: 40 sec. max.
- Temperature: –10°C to 60°C (14°F to 140°F)
- Humidity: 95% RH Non-condensing Max
- Listing: UL, FM, CE
Reviews
There are no reviews yet.