System Sensor P2RK-P-

Features

-Weatherproof per NEMA 4X, IP56
-Listed to UL 1638 (strobe) and UL 464 (horn)
-Compatible with System Sensor synchronization protocol and legacy SpectrAlert products
-Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115, 135,
150, 177, and 185
-Automatic selection of 12- or 24-volt operation at 15 and 15/75
candela
-Rotary switch for horn tone and three volume selections
-Horn rated at 88+ dBA at 16 volts
-Rated from –40°F to 151°F
-Universal mounting plate with an onboard shorting spring that
tests wiring continuity before devices are installed
-Plug-in design with minimal intrusion into the back box
-Tamper-resistant construction

Details

SpectrAlert Advance offers the broadest line of outdoor horns,
strobes, and horn strobes in the industry. With white or red plastic
housings, wall or ceiling mounting options, and plain or FIRE-printed
devices, SpectrAlert Advance can meet virtually any application
requirement, including indoor, outdoor, wet, and dry applications in
temperatures from −40°F to 151°F.

Like the entire SpectrAlert Advance line, outdoor horns, strobes, and
horn strobes for wall applications include a variety of features that
increase application flexibility and simplify installation. First, fieldselectable settings, including candela, automatic selection of 12- or
24-volt operation, horn tones, and three volume options enable
installers to easily adapt devices to meet requirements.

Next, SpectrAlert Advance devices use a universal mounting plate
for both wall and ceiling applications. This mounting plate includes
an onboard shorting spring that ensures wiring continuity before
devices are installed, so installers can verify proper wiring without
mounting the devices and exposing them to potential construction
damage. Once the plates are mounted, all SpectrAlert Advance
devices utilize a plug-in design with a single captured screw to
speed installation and virtually eliminate costly ground faults.

Outdoor devices ship with weatherproof plastic back boxes (metal
back boxes are available separately) that accommodate in-andout wiring for daisy chaining devices. Plastic back boxes feature
removable side flanges and improved resistance to saltwater
corrosion. Knock-outs located on the back eliminate the need to drill
holes for screw-in mounting. Plastic and metal weatherproof back
boxes come with ¾‑inch top and bottom conduit entries and ¾‑inch
knock-outs at the back. A screw-in NPT plug with an O-ring gasket
for a watertight seal is included with each back box.

Datasheet

Similar Item