Notifier NFW-100XR Fire Alarm Control Panel. (New w/ cabinet)

The FireWarden-100X (NFW-100X) is the latest intelligent addressable
Fire Alarm Control Panel (FACP) within the FireWarden Series
and is a direct replacement for the FireWarden-100 (NFW-100). The
NFW-100X comes with a pre-installed communicator and supports
up to 198 addressable devices (99 detectors and 99 modules). With
an extensive list of powerful features, the NFW-100X programs just
like FireWarden-100 products, yet fits into applications previously
served only by conventional panels.
The pre-installed IPOTS-COM is a dual technology (POTS and IP)
communicator. The POTS transmits system status (alarms, troubles,
AC loss, etc.) to a Central Station via the public switched telephone
network. The IP communicator’s internet monitoring capability sends
alarm signals over the Internet saving the monthly cost of two dedicated
business telephone lines. Although not required, the secondary
telephone line may be retained providing backup communication
over the public switched telephone line. Optional cellular reporting is
available using the CELL-MOD or CELL-CAB-N.
Remote and local programming of the control panel is possible using
the FS-Tools Upload/Download utility. Programming databases can
be uploaded/downloaded via the panel’s USB port (and USB cable)
or via an ethernet connection using the IPOTS-COM communicator.
The USB port also allows for the download or upload of the entire
program, history file, walk-test data, current status and system voltages
by means of a USB flash drive.
The power supply and all electronics are contained on a circuit
board supported on a new quick install chassis and housed in a
metal cabinet. Available accessories include local and remote
upload/download software, remote annunciators, and reverse polarity/
city box transmitter (4XTM).
Features
• Listed to UL Standard 864, 10th edition
• Pre-installed IPOTS-COM Ethernet IP and POTS (Plain Old Telephone
Service) Central Station Communicator over AlarmNet
• Optional CELL-MOD or CELL-CAB-N GSM Central Station Communicator
over AlarmNet®
• Automated activation of the NFC-50/100 Emergency Command
Center
• NFC-FFT Firefighter Telephone option
• Compatible with SWIFT® wireless devices
• Auto-programming (learn mode) reduces installation time.
Reports two devices set to the same address
• Four built-in, independently programmable Style Z (Class A) or
Style Y (Class B) NAC circuits
• Selectable strobe synchronization for System Sensor, Wheelock,
and Gentex devices
• Notification Appliance Circuit End of Line resistor matching
• Four programmable function keys for ease of maintenance
• Two programmable relays and one fixed trouble relay
• Built-in Programmer
• Integral 80-character LCD display with backlighting
• Real-time clock/calendar with automatic daylight savings control
• History file with 1,000 event capacity
• Addressable sounder base compatibility
• Control module delay timer
• Automatic detector sensitivity testing (NFPA 72 compliant)
• Automatic device type-code verification
• Point trouble identification
• Waterflow selection per module point
• Alarm verification selection per detector point

• Maintenance alert warns when smoke detector dust accumulation
is excessive
• One-person audible or silent walk test with walk-test log and
printout
• System alarm verification selection per detector point
• PAS (Positive Alarm Sequence) and Pre-signal per point (NFPA
72 compliant)
• Up to 16 ANN-BUS annunciators- 8 per each ANN-Bus
• Remote Acknowledge, Alarm Silence, Reset and Drill via
addressable modules or remote annunciator
• Upload/Download of program and data via USB with optional FSTools
Programming Utility
SLC COMMUNICATION LOOP
• Supports FlashScan® and CLIP protocols
• SLC operates up to 10,000 ft. (3,000 m) in FlashScan mode with
twisted, unshielded wire
• Single addressable SLC loop which meets NFPA Class B and
Class A requirements
• 198 addressable device capacity (99 addressable detectors and
99 modules)
• Compatible with NOTIFIER FireWarden and ONYX Series
addressable devices (refer to the FireWarden SLC Wiring Manual)
NOTIFICATION APPLIANCE CIRCUITS (NACS)
• Four independently programmable output circuits. Circuits can be
configured for the following outputs:
– Style Y (Class B)
– Style Z (Class A)
• Silence Inhibit and Autosilence timer options
• Continuous, March Time, Temporal, or California code for main
circuit board NACs with two-stage capability
• Selectable strobe synchronization per NAC
• 2.5 A special application, 250mA regulated, total power for NACs
NOTE: Maximum or total 24VDC system power shared between all NAC
circuits and the ANN-BUS is 2.7 A