Mircom MIX-100X Isolator Module

The Mircom MIX-100X Fault Isolator Module is used to protect the
system against wire-to-wire short circuits on the analog loop.
The modules should be spaced between groups of sensors or
modules in a loop to protect the rest of the loop. In the event
of a short circuit between any two fault isolator modules, both
modules immediately switch to an open circuit condition and
isolate any group of sensors between them. The remaining
units on the circuit will continue to operate in a normal fashion
(must be wired in Class ‘A’ or Style 6).

Mircom’s Alpha Series Intelligent Addressable Modules are
designed to meet a wide range of applications. The monitor
and control modules can be used to supervise and activate
sounders, strobes, door closers, pull stations, waterflow
switches, conventional smoke detectors and more. An eight
position dip switch allows for the address setting of the device
and the wiring class/style of the devices that are connected to
the module. All modules mount in a standard 4” x 4” x 2 1/8”
junction box.

Download the Specification sheet in *.pdf format

Similar Item