Gamewell-FCI ASD-PTL2F Photo Thermal Smoke Detector

Gamewell-FCI ASD-PTL2F

The Gamewell-FCI Velociti® Series, analog addressable plug-in smoke sensors with integral communication provide features that surpass conventional sensors.
Sensitivity can b e programmed in the control panel software. Continuously monitored and reported to the panel. Point ID capability allows each sensor’s address to b e set. Providing exact locations for selective maintenance – the chamber contamination reaches, an unacceptable level.
The ASD-PL2F photoelectric sensor’s unique optical sensing chamber. Engineered to sense smoke produced by a wide range, of combustion sources. Dual electronic thermistors add 135°F (57°C) fixed-temperature thermal sensing on the ASD-PTL2F model.
The Velociti® Series uses a communication protocol. That substantially increases the speed, of communication between the sensors and certain Gamewell-FCI analog addressable fire alarm controls. These devices operate in a grouped fashion. If one of the devices in the group has a status change. The panel’s microprocessor stops the group poll and concentrates on the single device.
Installation
The ASD-PL2F plug-in sensors use a separate base to simplify installation, service, and maintenance. A special tool allows maintenance personnel to plug in and remove sensors, without using a ladder.
Mount the base on a box that i s 1.5″ (3.8 cm) deep. Suitable mounting base boxes include:
A 4.0″ (10.2 cm) square box.
A 3.5″ (8.9 cm) or 4.0″ (10.2 cm) octagonal box.
Single-gang box (except relay or isolator bases).
With B200S or B200SR base. They a re mounted on a 4.0″ (10.2 cm) octagonal or square box.
With B224RB or B224BI base. They a re mounted on a 3.5″ (8.9 cm) octagonal box, or a 4.0″ (10.2 cm) octagonal or square box.
Wiring “T-taps” or branches a re permitted for Style 4 (Class “B”) wiring.

Gamewell-FCI ASD-PTL2F

Datasheet

Relative Item